RMP60 installation guide
Partnering successful,
20 seconds probe in standby
Partnering mode
Off
Active
120 seconds probe
in standby
After 8 seconds
4.12
New settings
Return to "Switch-on method"
complete,
probe in standby
NOTES:
If using "Multiple probe mode", refer to the RMI-Q radio machine interface installation guide
(Renishaw part no. H-5687-8504).
Further probes used require the same "Multiple probe mode" setting, but do not need to be
partnered with the RMI-Q.
To partner an RMP60 with an RMI-Q, see page 4.7, "RMP60 – RMI-Q partnership", for further
information. Once partnering has been successful, the RMP60 will display "Partnering successful"
and go into standby after 20 seconds.