Stylus On-Centre Adjustment - Renishaw RMP60 Installation Manual

Stylus on-centre adjustment

NOTES:
During adjustment, care must be taken not to rotate the probe relative to the shank, as damage to the
bobbin (A-4038-0303) can occur where fitted.
If a probe and shank assembly is dropped, it must be rechecked for correct on-centre adjustment.
Do not hit or tap the probe to achieve on-centre adjustment.
2
× 2
± 10 µm
1
3
6 Nm – 8 Nm
(4.4 lbf.ft – 5.9 lbf.ft)
× 4
± 10 µm
× 4
1.5 Nm
– 3.2 Nm
(1.1 lbf.ft –
2.4 lbf.ft)
± 2.5 µm
3.7