Renishaw RMP60 Installation Manual page 45

Level 1
120 seconds probe
in standby
Stop triggering here, unless "Multiple probe
Multiple probe mode (omitted for "Radio on")
(see "Multiple probe mode settings" to view all 16 choices)
Mode off
Machine 1
If no changes are made in "Multiple probe mode", deflecting the stylus
for more than 4 seconds will return the probe settings to beginning of the
Trigger Logic menu. If "Multiple probe mode" is selected, proceed to
"Partnering mode" to repartner one probe with the RMI-Q.
Trigger filter
Level 2
Partnering mode
Off
After 8 seconds
Hibernation mode (only for "Radio on")
On On
30 s 5 s
mode" is required, in which case deflect the
stylus for more than 4 seconds.
Mode on
Machine 2
Level 3
Partnering successful,
20 seconds probe in standby
Active
Off
Machine 16
4.11