Setting Up The Projector; Placing In Front Of The Screen - Canon REALiS WUX10 Mark II User Manual

Setting Up the Projector

■Placing in Front of the Screen

Place the projector in front of the screen.
• Be sure to place the projector parallel to the
screen to ensure distortion-free projections.
• The screen must not be exposed to direct sun-
light or light from lighting equipment. In a bright
room, it is recommended to limit ambient light-
ing in order to improve the image quality.
Projected Image Size
The projected image size is determined by the distance between the projector and
the screen (projection distance) as well as the zoom (P53). For the relationship
between the screen size and the projection distance, see also the table listed in
"Relationship between Screen Size and Projecting Distance" on page131.
Screen size
Width (cm)
Height (cm)
Projection distance
(zoom max)
Projection distance
(zoom min)
Projection distance (zoom min)
40 60 80
86 129 172
54 81 108
1.2 m 1.8 m 2.4 m
(3.9') (5.9') (7.9')
1.8 m 2.6 m 3.5 m
(5.9') (8.5') (11.5')
33
Projection distance (zoom max)
100 150 180
215 323 388
135 202 242
3.0 m 4.5 m 5.4 m
(9.8') (14.8') (17.7')
4.4 m 6.7 m 8.0 m
(14.4') (22.0') (26.3')
Screen
Optical axis
200 250 300
431 538 646
269 337 404
6.1 m 7.6 m 9.1 m
(20.0') (24.9') (29.9')
8.9 m
– –
(29.2')