Adjusting Image
Adjusting the Focus
You can adjust the focus with the FOCUS button. The projection image may be out of
focus if the projection distance is beyond the range of 1.2 m (3.9') to 9.1 m (29.6'). Move
the projector installation position if such is the case. (P33)
■Auto focusing
Press the FOCUS button, and then the AUTO SET button.
If you select [16:9 D. image shift] or [4:3 D. image shift] for [Screen aspect], the auto focus
function will be disabled.
■Manual focusing
1
Press the FOCUS button to pop up a window shown at the lower right.
Remote control
2
Press the pointer buttons to adjust the focus.
Remote control
[ ] / [ ]: Rough adjustment.
[<] / [>]: Fine adjustment.
3
When the focus is adjusted optimally, press the OK button or the FOCUS button.
Top control
Top control
54