Selecting A Logo At Startup; Selecting Aspect Ratio Of Screen - Canon REALiS WUX10 Mark II User Manual

Selecting a Logo at Startup

[User screen settings] - [Projector on]
HDMI
DIGITAL PC
ANALOG PC
User screen settings
Projector on
You can display a specified logo on a
screen from the moment the projector is
turned on to the moment it is ready fro pro-
jection.
Skip Projects an input signal immedi-
ately after turning on the projec-
tor.
Canon logo Displays the Canon logo cap-
tured at the factory.
Press the OK button to accept your setting
and then press the MENU button.
• [Canon logo] is the factory default.

Selecting Aspect Ratio of Screen

[Screen aspect]
COMPONENT
VIDEO
Display settings
You can select proper option corresponding to
the aspect ratio of the projecting screen. (P57)
Press the OK button to accept your setting
and then press the MENU button.
• [16:10] is the factory default.
• If you select [16:9 D. image shift] or [4:3
• [Auto] may be automatically selected for
85
HDMI
DIGITAL PC
ANALOG PC
Screen aspect
16:10 Select this when you use a screen
with aspect ratio of 16:10.
16:9 Select this when you use a screen
with aspect ratio of 16:9.
4:3 Select this when you use a screen with
aspect ratio of 4:3.
16:9 Select this when you use a screen
with aspect ratio of 16:9.
D. image
You can move the screen upward or down-
shift
ward with D.SHIFT/KEYSTONE button.
4:3 Select this when you use a screen
with aspect ratio of 4:3.
D. image
You can move the screen to the left or right
shift
with D.SHIFT/KEYSTONE button.
D. image shift], the keystone adjustment
will be reset. For more details, refer to
the page 58.
[Screen aspect] depending on the
screen aspect setting.
Setting Display Status
COMPONENT
VIDEO
Display settings