Canon REALiS WUX10 Mark II User Manual page 110

Setting Network
3
Click [Mail], enter appropriate values in the following field for the error report, and click
the [OK] button.
Setting items:
[To:]:
[Cc:]:
[From:]:
[SMTP server IP address]: The IP address of the available SMTP mail server
[SMTP server port number]: The port number of the available SMTP mail server
[SNTP server IP address]: The IP address of the available SNTP mail server (can be
[Time zone]:
[Mail resend interval]:
[Mail resend times]:
[Error report]:
The E-mail address to which the error report is sent
(Within 63 alphanumeric characters)
The E-mail address to which the carbon copy of the error
report is sent (Within 63 alphanumeric characters, can be
omitted)
The sender of the E-mail (the projector)
omitted)
The time zone of the installation site
The E-mail resending interval at a transmission failure
Setting range: 0 - 59 seconds (the factory default: 10 seconds)
The number of E-mail resending attempts at a transmis-
sion failure
Setting range: 0 - 255 times (the factory default: 3 times)
Turning ON/OFF the error report sending function (the
factory default: [OFF])
110