Adjusting Fine Color Adjustment (6-Axis Color Adjust); Correcting The Image According To The Ambient Light - Canon REALiS WUX10 Mark II User Manual

Setting the Image Quality
Adjusting Fine Color Adjustment (6-axis
color adjust)
[Advanced adjustment] - [6-axis color adjust]
HDMI
DIGITAL PC
ANALOG PC
Advanced adjustment
6-axis color adjust
You can make fine color adjustment with
RGB (red, green, blue) and CMY (cyan,
magenta, yellow). For the details of 6-axis
color adjust, refer to the page 135.
Off Disables the 6-axis color adjustment.
If you select [Adjust], the previous set-
ting of 6-axis color adjustment
becomes active again.
Adjust Enables the 6-axis color adjustment.
Use [ ] / [ ] to select [
Saturation], then adjust them with [<] /
[>].
Reset Returns any adjustment values to zero.
When you have completed the adjust-
ment, press the MENU button.
• [Off] is the factory default.
• The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Correcting the Image According to the
Ambient Light
[Ambient light]
COMPONENT
VIDEO
Image adjustment
You can correct and project an image
more appropriately according to the ambi-
ent light on the screen if you have
selected [Photo] for [Image mode].
Hue] or [
92
HDMI
DIGITAL PC
ANALOG PC
Ambient light
Off Projects an image with no correction.
Adjust You can specify the type and level
(brightness) of the ambient light.
Type Tungsten
Select this if the ambient light
source is a light bulb or bulb color
fluorescent.
Fluorescent
Select this if the ambient light
source is a day white fluorescent.
Fluorescent H
Select this if the ambient light
source is a daylight fluorescent.
COMPONENT
VIDEO
Image adjustment