Initializing Network Settings; Resetting To The Default Setting - Canon REALiS WUX10 Mark II User Manual

Initializing network settings

[Other settings] -[Network setting initialization]
HDMI
DIGITAL PC
ANALOG PC
Other settings
Network setting initialization
You can Initialize the network settings.
Press the OK button after selecting [Net-
work setting initialization], and the follow-
ing screen for confirmation appears:
Yes The network settings is initialized.
No Initialization is aborted.
Press the OK button to accept your setting
and then press the MENU button.
• Initialized are "IP address" and other
items set in "Connecting the Projector to
Network" (P105).
• You can do this initialization also from a
Web browser. (P114)

Resetting to the Default Setting

[Other settings] - [Factory defaults]
COMPONENT
VIDEO
System settings
You can reset the menu item settings and
restore the system settings to the factory
defaults.
Press the OK button after selecting [Fac-
tory defaults], and the following screen for
confirmation appears:
Press the OK button to accept your setting
and then press the MENU button.
• This function cannot reset the value of
• For factory defaults settings, refer to the
103
Setting Various Function
HDMI
DIGITAL PC
ANALOG PC
Other settings
Factory defaults
OK Settings are reset to default.
Settings are not reset to default.
Cancel
[Lamp counter], [Language], [Remote
control], [Input signal] and [Network set-
ting] to default.
page 143-145.
COMPONENT
VIDEO
System settings