Steps For Setting Up The Projector And Projecting An Image - Canon REALiS WUX10 Mark II User Manual

Steps for Setting Up the Projector and Projecting an Image

Connecting the Projector to Equipment (P36)
Turning on the Power (P44)
Do you want to project an image
from a notebook computer?
No
Performing the Auto Setup (P47)
Image projected properly?
No
Selecting an Input Signal (P49)
Image projected properly?
No
Adjusting the Image (P51)
Do the following adjustments.
• Setting the Display Resolution of the Computer (P51)
• Adjusting misaligned images or flickering of the
screen using the Auto PC (P52)
• Adjusting the Image Size (P53)
• Adjusting the Focus (P54)
• Adjusting keystone Distortion (P55)
Making Fine Adjustments
• Selecting an Aspect Ratio of Projected Image (Screen
aspect) and a Screen Mode (Aspect) (P57, P61)
• Selecting an Image Mode (P63)
For a notebook computer, turn on
Yes
the monitor output (P46) and then
go to Auto Setup.
Yes
Projection is complete.
Yes
Projection is complete.
32