Setting The Image Quality; Selecting An Image Quality - Canon REALiS WUX10 Mark II User Manual

Setting the Image Quality

Selecting an Image Quality

[Image mode]
HDMI
DIGITAL PC
ANALOG PC
Image mode
You can select an image mode suitable for
the projecting image.
You can select it also with the IMAGE but-
ton on the remote control. (P63)
Press the OK button to accept your setting
and then press the MENU button.
• [Standard] is the factory default.
• You can decide the image quality by
adjusting the following items in each
image mode:
[Brightness], [Contrast], [Sharpness],
[Gamma], [Color adjustment],
[Advanced adjustment] and
[Lamp mode].
• The adjustment you have made is
stored as each combination of input sig-
nals and an image mode.
COMPONENT
VIDEO
Image adjustment
86
Standard Select this to project an image
with near-original quality and a
high regard for reproduction of
white. It is suited to showing a
computer screen or watching
visual software (moving pictures)
in a bright room.
Presentation Select this to project an image
with quality suited for the presen-
tation. It is also suited to project
visual software (moving pictures)
with a high regard for the bright-
ness.
Movie Select this to project moving pic-
tures of all kinds. Its brightness is
suited to easily enjoy the atmo-
sphere of a movie theatre in a
dim room.
sRGB Select this if you want to project
an image in the display mode
conforming to the sRGB standard
(P132). It is suited to project an
image shot by sRGB-compatible
digital camera.
Photo If you select [Photo] for [Image
mode], make sure to set [Ambi-
ent light] in the [Image adjust-
ment] as well.
You can correct an image
according to the ambient light
based on [sRGB] in [Image
mode] and project the image with
higher tone on the screen by set-
ting [Ambient light].
It is suited to project an ornamen-
tal photo, etc. under an ambient
light.
It is available if the input signal is
[ANALOG PC-1], [ANALOG PC-
2], or [DIGITAL PC].