Adjust Input Signal (Analog Pc) - Vertical Pixels; Selecting Hdmi Input Level - Canon REALiS WUX10 Mark II User Manual

Setting Display Status
Adjust Input Signal (ANALOG PC) – Vertical
pixels
[Input signal settings] - [Vertical pixels]
HDMI
DIGITAL PC
ANALOG PC
Input signal settings
Vertical pixels
You can adjust the number of the pixels in
the vertical direction if the length of the
screen is too long or too short in the verti-
cal direction.
Use [<] / [>] to select a value.
When you have completed the adjust-
ment, press the MENU button.
• Perform this adjustment if the [AUTO
PC] function (P52) cannot adjust the
project image correctly.
• You can make adjustment either for
[ANALOG PC-1] or [ANALOG PC-2].

Selecting HDMI Input Level

[HDMI input level]
COMPONENT
VIDEO
Display settings
You can select this as required when you
project visual software with the HDMI sig-
nals.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• You can select this only when the type of
• The signal level is select automatically in
• If the HDMI output of your AV equipment
80
HDMI
DIGITAL PC
ANALOG PC
HDMI input level
signal sent from AV equipment is RGB.
[Auto] mode. (Some AV equipment may
not support this.)
allows switching between [Normal] and
[Expanded], we recommend you to set
[Expanded]. The contrast of images will
be improved and dark scenes will be
rendered more realistically. In this case,
select [Auto] or [Expanded] for the
HDMI input level.
For more detailed information, refer to
the User's Manual of your AV equipment
connected to the projector.
COMPONENT
VIDEO
Display settings