Splitwood Kit Mf28Swk - Valor MADRONA MF28JN Installation Manual
Direct vent zero clearance freestanding gas fireplace
Hide thumbs
Also See for MADRONA MF28JN:
- Installation & owner's manual (46 pages) ,
- Installation & owner's manual (54 pages) ,
- Homeowner's manual (24 pages)
Table of Contents
Advertisement
Installation
Splitwood Kit MF28SWK
Material required
• Splitwood Kit containing:
• 1 ceramic platform
• 5 logs
• 1 bag of embers
• Gloves, if desired (not included)
Installation
Unpack the kit carefully to avoid damaging the fragile
pieces. Install the kit as shown below. Please note that
the position of the logs is critical to ensure the good
performance of the appliance.
Platform
Insert the platform sideways into the firebox and place
it on top of the burner.
Logs
1. Identify the base log and place it in the cavity of the
ceramic platform. The front of the log should rest
against the lip of the sheet metal support behind
the burner.
2. Place the center log inserting its two pins in the
holes at the front of the platform.
Fuel Beds
25
Advertisement
Table of Contents
