Remote Control Pairing - Valor MADRONA MF28JN Installation Manual

Installation
Synchronize Receiver and Handset
The receiver and handset of the remote control system
must be initially paired before the first use.
1. If not already done, place a new 9 V alkaline battery
in the handset.
2. Identify the RESET button on the front of the re-
ceiver.
3. With a thin object, press and hold the receiver's
reset button until you hear one short an done long
beeps. Release the button after the second beep.
4. Within the next 20 seconds, press the small flame
button ( ) on the handset until you hear two short
beeps confirming the pairing is set.
If you hear a long beep, the pairing has not been
done or the wires are not connected correctly.
This is a one time setting only and is not required when
changing the batteries in the remote handset. The
remote control system is now ready to use.

Remote Control Pairing

RESET
Receiver
29