Cpu /Ram/ Storage Installation; Figure 3-1: Remove The Cover; Figure 3-2: Take Out The Motherboard - IEI Technology TANK-XM810 Series User Manual

3.2 CPU /RAM/ Storage Installation

To install the CPU /RAM/ Storage, please follow the steps below:
Step 1:
Remove the 6 screws on the side, and then remove the top cover
(Figure 3-1).

Figure 3-1: Remove the Cover

Step 2:
Remove the 11 spring screws on the motherboard, and then take out the
motherboard (including the motherboard holder) (Figure 3-2).

Figure 3-2: Take out the motherboard

Step 3:
Pull the lever of the CPU buckle, remove the CPU protection cover, install
the CPU at the notch, and fasten the lever down in the buckle (Figure 3-3).
Page 18
TANK-XM810