Principle Of Operation - Stanley Avdel 07287 Instruction And Service Manual

E N G L I S H

4.2 PRINCIPLE OF OPERATION

OPTION 1
• Ensure that the correct nose equipment is fi tted.
• Connect the tool to the air supply
• Insert the fastener body squarely into the prepared hole of the application.
• Apply the tool to the protruding fastener stem.
• Fully operate the trigger. The tool cycle will ensure the fastener is placed.
OPTION 2
• Ensure that the correct nose equipment is fi tted
• Connect the tool to the air supply.
• Insert the fastener stem into the nose of the tool.
• Insert the tool with fastener squarely into the prepared hole of the application.
• Fully operate the trigger. The tool cycle will ensure the fastener is placed.
10
O R I G I N A L I N S T R U C T I O N