Servicing The Tool; Daily Servicing; Weekly Servicing; Service Kit - Stanley Avdel 07287 Instruction And Service Manual

E N G L I S H

7. SERVICING THE TOOL

Regular servicing should be carried out and a comprehensive inspection performed annually or every 500000 cycles,
whichever is sooner.
CAUTION - Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals
may weaken the materials used in these parts.
CAUTION - Before maintenance, remove any dangerous substances that may have accumulated due to work
processes.
CAUTION - The employer is responsible for ensuring that tool maintenance instructions are given to the
appropriate personnel.
CAUTION - The operator should not be involved in maintenance or repair of the tool unless properly trained.
CAUTION - The tool shall be examined regularly for damage and malfunction.
CAUTION - Read Safety Instructions on page 4 to 6.

7.1 DAILY SERVICING

• Daily, before use or when fi rst putting the tool into service, pour a few drops of clean, light lubricating oil into the
air inlet of the tool if no lubricator is fi tted on air supply. If the tool is in continuous use, the air hose should be
disconnected from the main air supply and the tool lubricated every two to three hours.
• Check for air leaks. If damaged, hoses and couplings should be replaced by new items.
• If there is no fi lter on the pressure regulator, bleed the air line to clear it of accumulated dirt or water before connecting
the air hose to the tool. If there is a fi lter, drain it.
• Check that the nose equipment is correct.
• Check oil level in intensifi er's reservoir. If necessary top up with the prescribed priming oil.

7.2 WEEKLY SERVICING

• Dismantle and clean nose assembly, with special attention to the jaws. Lubricate with Moly Lithium grease EP 3753
before assembling.
• Check for oil leaks and air leaks in the air supply hose and fi ttings.
For all servicing we recommend the use of the service kit (part number 07900-02670).

7.3 SERVICE KIT

16
Service Kit 07900-02670
Part Number
07900-00589
07900-00590
07900-00591
07900-00592
Description
SPREADER
PUSHER
BULLET
GAUGE
O R I G I N A L I N S T R U C T I O N
Qty
1
1
1
1