Chapter 4 Angular Measurements
Angular Position Measurements
4a
4b
Z
4
Table "engaged" position
4a
After base has rotated, provide 3.0 mm
closing movement to provide sufficient
engagement force between top and base.
Allow enough dwell time for measurement
data collection before beginning next
lift-rotate-lower cycle.
For remaining measurements, cycle
controlling axis between this position and
relative zero position.
4b
Table top engaged with base
Figure 4-16B. Angular position measurements—principles (Part 2 of 2)
Measurements Reference Guide
Y
X
4
5
5
Instruct Agilent 5530 calibrator to
collect data.
For remaining measurements, repeat
step 2 through this step until all data
has been collected.
4-27