Table of Contents
Advertisement
Chapter 8 Parallelism Measurements
Making Coplanar Parallelism Measurements
Making the first axis measurement
To make the first axis measurement, follow these steps:
1
Return each of the two moveable parts to its start position.
2
On the Set Up Laser: PARALLELISM screen, do the following:
•
In the Measurement Axis box, select Coplanar.
•
In the Measurement Axis box, select X.
"X" tells the system this is the first axis measurement.
For instructions on completing the other fields on the screen, use the
online help.
3
On the Set Up Laser: PARALLELISM screen, select Set Up Meas.
The Set Up Measurement: PARALLELISM screen is displayed
(Figure 8-7).
4
Complete the fields on the Set Up Measurement: PARALLELISM screen.
If necessary, use the online help.
5
Select Collect Data.
The Collect Data: PARALLELISM screen is displayed (Figure 8-8).
6
On the Collect Data: PARALLELISM screen, select Reset Position.
This tells the system that the current position of the reflector is the "zero"
point, from which all distances will be measured.
For instructions on completing the other fields on the screen, use the
online help.
7
Move the machine's moveable part until the machine has reached the first
measurement position.
8
Select Record.
If you are using the optional remote control unit, press the Record button.
Measurements Reference Guide
8-21
Advertisement
Table of Contents
