Table of Contents
Advertisement
Manufacturer's Name:
Manufacturer's Address:
Supplier's Address:
Declares under sole responsibility that the product as originally delivered
Product Name:
Model Number:
Product Options:
Complies with the essential requirements of the following applicable European Directives,
and carries the CE marking accordingly:
•
The Low Voltage Directive (2006/95/EC)
•
The EMC Directive 89/336/EEC, amended by 93/68/EEC
Conforms to the following product standards:
EMC
Standard
IEC 61326-1:2002/EN 61326:1997+A1:1998+A2:2001+A3:2003
CISPR 11:1990 / EN 55011:1990
IEC 61000-4-2: 1995+A1: 1998 / EN 61000-4-2:1995
IEC 61000-4-3: 1995 / EN 61000-4-3: 1996
IEC 61000-4-4: 1995 / EN 61000-4-4: 1995
IEC 61000-4-5: 1995 / EN 61000-4-5: 1995
IEC 61000-4-6: 1996 / EN 61000-4-6: 1996
IEC 61000-4-11: 1994 / EN 61000-4-11: 1994
Canada: ICES-001: 2004
Australia/New Zealand: AS/NZS CISPR 11: 2004
This product was tested in a typical configuration with Agilent Technologies test systems
Safety
IEC 61010-1:2001 / EN 61010-1:2001
Canada: CSA C22.2 No. 61010-1-04
Supplementary Information:
This DoC applies to above-listed products placed on the EU market after:
25 August 2008
Date
For further information, please contact your local Agilent Technologies sales office, agent or distributor,
or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, D 71034 Böblingen, Germany.
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Agilent Technologies, Incorporated
5301 Stevens Creek Boulevard
Santa Clara, CA 95051
USA
5530 Dynamic Calibrator
E1735A USB Axis Module, E1736A USB Sensor Hub,
E1737A Material Sensor, E1738A Air/Temp/Hum/Pres
Sensor
This declaration covers all options of the above products
Randall White
Product Regulations Manager
Limit
Group 1 Class A
4 kV CD, 8kV AD
3 V/m, 80-1000MHz
0.5 kV signal lines, 1 kV power lines
0.5 kV line-line, 1kV line-ground
3 V, 0.15-80 MHz 1 cycle, 100%
Dips: 30% 10ms; 60% 100ms
Interrupt: > 95%@5000ms
Advertisement
Table of Contents
