Table of Contents
Advertisement
Chapter 2 Linear Measurements
Making the Measurement
Figure 2-16. Collect Data: LINEAR screen
5
On the Collect Data: LINEAR screen, select Reset Position.
This tells the system that the current position of the retroreflector is the
"zero" point from which all distances will be measured.
If necessary, use the online help to complete the rest of the fields on this
screen.
6
Move the machine's moveable part to the first measurement point.
7
Select Record.
If you are using the optional remote control unit, press the Record button
on that unit.
2-28
Measurements Reference Guide
Advertisement
Table of Contents
