Table of Contents
Advertisement
Chapter 11 Diagonal Measurements
Slant-Bed Lathe
Figure 11-18. Analyze Data: DIAGONAL screen (following Recall Data)
Slant-Bed Lathe
Guide: This information relates to flowchart item 15 in Figure 11-1.
The Agilent 10768A kit optics can also be used to calibrate a slant-bed
lathe without tilting the laser head.
The Agilent 10768-60201 Beam Steering Mirror Assembly that was
developed for the Diagonal Measurement application is used to simplify
the setup for measurements on a slant-bed lathe. (Slant-bed lathes can
also be measured with the Agilent 10769A Beam Steering Mirror, which
provides the beam steering assembly and some additional mounting
hardware.)
Figures 11-19 and 11-20 show the slant-bed setup.
Measurements Reference Guide
11-39
Advertisement
Table of Contents
