Table of Contents
Advertisement
Chapter 2 Linear Measurements
Mounting and Aligning the Optics on the Target Machine
•
The method you choose to mount the optic is up to you.
A
Removing the large
knurled knob
B
Screwing in the post
***********************
1
Spindle
2
Post
3
Height adjuster
4
Large knurled knob
Figure 2-9. Alternate height adjuster mounting
8
Mount the interferometer assembly on the spindle as shown in
Figure 2-10. Or, mount the retroreflector on the spindle as shown in
Figure 2-11.
2-16
Or, remove the large knurled knob from the height adjuster and screw
in the post as shown in Figure 2-9.
4
3
A
B
Measurements Reference Guide
1
2
3
Advertisement
Table of Contents
