Connection Of External Regenerative Resistor - Mitsubishi Electric MELDAS MDS-R Series Specifications And Instruction Manual

7-6-2 Connection of external regenerative resistor

Connect the regenerative resistor across P-C of CN30.
(1) Connection of one resistor
GZG200W26OHMJ, GZG300W20OHMJ
GZG80W26OHMJ, GZG400W13OHMJ, GZG400W8OHMJ
(2) Connection of three resistors in parallel
GZG200W120OHMJ, GZG200W39OHMJ, GZG300W39OHMJ
GZG200W20OHMJ, GZG300W20OHMJ
P
C
Downloaded from ManualsNet.com
Install a protective cover to prevent foreign matter
(cutting chips, cutting oil, etc.) from entering the
regenerative resistor or the regenerative resistor
from being touched directly.
CN30
P
C
Install a protective cover to prevent foreign
matter (cutting chips, cutting oil, etc.) from
entering the regenerative resistor or the
regenerative resistor from being touched
directly.
CN30
Use a twisted flame retardant wire.
Wire length 5m or less
search engine
7. Wiring and Connection
External optional regenerative resistor
Use a twisted flame retardant wire.
Wire length 5m or less
External optional regenerative resistor
100mm or more
7 - 12
100mm or more