Appendix 6-1-2 Handling By User - Mitsubishi Electric MELDAS MDS-R Series Specifications And Instruction Manual

Appendix 6-1-2 Handling by user

The following technical opinion is solely Mitsubishi's opinion. The shipper must confirm the latest IATA
Dangerous Goods Regulations, IMDG Codes and laws and orders of the corresponding export country.
T hese should be checked by the company commissioned for the actual transportation.
IATA
IMDG Code
■ When shipping isolated lithium battery products (Packing Instruction 903)
(1) Reshipping in Mitsubishi UN packaging
Mitsubishi packing applies the isolated battery's safety test and packaging specifications
complying with the UN Regulations (Packing Instruction 903).
The user only needs to add the following details before shipping. (Consult with the shipping
company for details.)
(a) Indication of container usage mark on exterior box (Label with following details
(b) Preparation of shipping documents (Declaration of dangerous goods)
(2) When packaged by user
The user must follow UN Regulations when packing, preparing for shipping and preparing the
indications, etc.
(a) Packing a lithium battery falling under Class 9
(b) Packing a lithium battery not falling under Class 9
Downloaded from ManualsNet.com
Appendix 6 Transportation Restrictions for Lithium Batteries
: International Air Transport Association
: A uniform international code for the transport of dangerous goods by seas
determined by IMO (International Maritime Organization).
recorded.)
 Proper shipping name (Lithium batteries)
 UN NO. (UN3090 for isolated battery, UN3091 for battery incorporated in a device or
included)
 Shipper and consignee's address and name
Shipper information
(Refer to the section "Appendix 6-3 Example of hazardous goods declaration list")
 Consult with The Ship Equipment Inspection Society of Japan for details on packaging.
 Prepare for shipping as explained in "(1) Reshipping in Mitsubishi UN packaging".
The Ship Equipment Inspection Society of Japan
Headquarters Telephone: 03-3261-6611 Fax: 03-3261-6979
 Cells and batteries are separated so as to prevent short circuits and are stored in a strong
outer packaging. (12 or less batteries, 24 or less cells.)
 Prepare for the certificates or test results showing compliance to battery safety test.
The safety test results have been obtained from the battery manufacturer. (Consult with
Mitsubishi when the safety test results are required.)
 Prepare for shipping as explained in "(1) Reshipping in Mitsubishi UN packaging".
search engine
Example of completing form
Consignee information
A6 - 3