Appendix 3
Connector
Mounted onto an external input connection connector of the Simple Motion module and used for wiring an external device.
The "external device connector" includes the following 3 types.
Connector type
Type
Soldering type (LD77MHIOCON)
*1
Soldering type
Pressure-displacement type
*1 Make sure to purchase the connector which is sold separately since this is not an option.
Specifications of the connector
Part name
Applicable connector
Applicable wire size
The external input wiring connector has been prepared. Please purchase them by a customer.
■Specialized tool
• Manual harness tool for pressure-displacement type (Manufactured by Sumitomo 3M Limited.)
Model name
10960 (Press body)
10962 (Fixture unit)
10963 (Fixture block)
10964-1 (Cable clamp (small) for 14 to 50 poles)
• Contact for the specialized tool
Sumitomo 3M Limited: http://solutions.3m.com/wps/portal/3M/ja_JP/WW2/Country/
APPX
80
Appendix 3 Connection with External Devices [FX5-SSC-S]
Downloaded from
ManualsNet.com
Connection with External Devices [FX5-
SSC-S]
One-touch lock style
Screw tightening style
*1
One-touch lock style
Specification
Soldering type (One-touch lock style/Screw tightening
style)
AWG30 to AWG24 (0.05 to 0.2 mm
search engine
Model name
Connector
10126-3000PE
10126-3000PE
10126-6000EL
Pressure-displacement type (One-touch lock style)
2)
AWG28 (twisted, 0.08 mm
Connector case
10326-52F0-008
10326-52A0-008
10326-3210-000
2
)