Installing The Network Drivers; Changing The Default Configuration - HP Deskpro EN Supplementary Manual

Installing the
Network Drivers

Changing the Default Configuration

4. Select Media Speed and change the value from AUTO to
10 Mbs or 100 Mbs, depending on the capabilities of your
network.
5. Select Duplex Settings and change the value from AUTO
to Full or Half, depending on the capabilities of your
network.
6. Exit the Network control application.
You will be prompted to restart your computer in order for
the changes to take effect.
The device drivers in the network software enable the computer
to communicate with the network.
Device drivers are supplied for Windows 95 and
Windows NT Workstation 4.0. If you are using another
operating system, device drivers may be installed from
files included with the network operating system or
device driver files available from Compaq. Updated
device drivers may also be downloaded from the Compaq
Web Site, www.compaq.com.
If reinstallation of the device drivers on Small Form
Factor models ever becomes necessary, use your backup
diskettes or the Compaq Restore CD. If you did not create
backup diskettes, then order these diskettes from
Compaq, using the information in the Software Reference
Guide.
Use network management tools to reinstall device drivers
on Net PC models.
Complete instructions for installing the network device drivers
are available in the file C:\CPQNET\README.TXT.
To change the default configuration settings, run Computer
Setup. Refer to the Software Reference Guide for more
information.
Guide to Features & Upgrades 2-5