Download  Print this page

Setting Up, Backing Up, Restoring, And Recovering Windows 7; Setting Up The Windows 7 Operating System; Installing Or Upgrading Device Drivers - HP Z440 User Manual

Hide thumbs

Advertisement

4
Setting up, backing up, restoring, and
recovering Windows 7
This chapter provides setup and update information for the Windows 7 operating system. It includes these
topics:

Setting up the Windows 7 operating system

Backing up, restoring, and recovering Windows 7
CAUTION:
system is successfully installed. Adding hardware might cause errors and prevent the operating system from
installing correctly.
NOTE:
After you set up the operating system, be sure that the latest BIOS, drivers, and software updates
are installed on the workstation. See
Setting up the Windows 7 operating system
CAUTION:
Turning off the workstation during installation can damage the installation and operation of the software.
For complete installation and configuration instructions, go to
windows7/help. Additional information is available in the Windows 7 online Help after you successfully install
the operating system.

Installing or upgrading device drivers

You must install the appropriate device drivers before you install hardware devices. Follow the installation
instructions that came with each device. For optimum performance, your operating system must have the
most recent updates, patches, and service packs. See
additional driver and software update information, see
20
Chapter 4 Setting up, backing up, restoring, and recovering Windows 7
Do not add optional hardware or third-party devices to the HP workstation until the operating
After installation has started, do not turn off the workstation until the process is complete.
Updating the workstation on page
http://www.hp.com
Updating the workstation on page
49.
http://windows.microsoft.com/en-US/
for HP-qualified drivers. For
49.

Advertisement

Table of Contents

   Related Manuals for HP Z440

   Related Content for HP Z440

This manual is also suitable for:

Z640Z840 workstation series

Comments to this Manuals

Symbols: 0
Latest comments: