Installing The Switch 4000M And 8000M; Included Parts - HP ProCurve 4000M Installation Manual

Installing the Switch 4000M and 8000M

The HP Switch 4000M and 8000M are easy to install units. They each come
with an accessory kit that includes the brackets for mounting the switch in a
standard 19-inch telco rack or an equipment cabinet, or on a wall, and with
rubber feet already attached so they can be securely located on a horizontal
surface. The brackets are designed to allow mounting the switches in a variety
of orientations.
This chapter shows you how to install your Switch 4000M and 8000M.

Included Parts

The Switch 4000M and 8000M have the following components shipped with
them:
HP ProCurve Switch 4000M and 8000M Installation Guide (5967-6916),
this manual
HP ProCurve Switch Management and Configuration Guide
(5967-6914 for the Switch 4000M; 5967-2142 for the Switch 8000M)
HP TopTools for Hubs & Switches - CD ROM and booklet
Customer Support/Warranty booklet
Accessory kit (5064-4213)
• two mounting brackets
• four 10 mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
Console cable
Power cord, one of the following:
Australia/New Zealand
United Kingdom
China
Continental Europe
Denmark
Japan
Switzerland
United States/Canada/Mexico
(8120-6803)
(8120-6801)
(8120-8377)
(8120-6802)
(8120-6806)
(8120-6804)
(8120-6807)
(8120-6805)
2
2-1