Set String Id; Set String Header - Datalogic PowerScan PD96 Series Product Reference Manual

SET STRING ID

Set String ID
Sets the identifier of the predefined strings.
Set String ID
$CPWEB
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Set String Header

Sets the header of the predefined strings.
Set String Header
$CPWED
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then scan the bar
code at left and then read 6 digits representing 3
ASCII characters from the

0x00000000000000000000000000000000
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left, and then read 32 digis representing 16 ASCII
characters in
The digits must be the hexadecimal ASCII represen-
tation of the desired characters. If less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.

0x00000000000000000000000000000000
ENTER/EXIT PROGRAMMING MODE
Appendix D,
CANCEL
Appendix D, Keypad.
CANCEL
PRODUCT REFERENCE GUIDE
Keypad.
245