Linking A Bt Reader To A Pc - Datalogic Gryphon I GM440 Series Product Reference Manual

Setup

Linking a BT Reader to a PC

The reader can optionally be linked to a Bluetooth-enabled PC with the serial
port profile, in either server mode or client mode.
Linking to a PC in Server Mode (BT Slave Mode)
To link a BT reader in server mode to a Bluetooth-enabled PC, follow these
steps:
1. Install any drivers provided with the Bluetooth adapter.
2. Scan the bar code below to make the scanner visible to the host com-
3. Use the host computer's Bluetooth manager to "Discover new devices"
4. Select "connect" on the PC to link the reader to the PC. Use an RS-232
Linking to a PC in Client Mode (BT Master Mode)
The reader can optionally be linked in client mode to a Bluetooth-enabled PC
with the serial port profile. To do this, follow these steps:
1. Ensure the PC or terminal can network with Bluetooth devices and that
2. Ensure that a COM port is assigned under Services within the Bluetooth
3. Create a Link label that contains the address of the PC Bluetooth
4. Scan the link label you created in step 3.
18
puter.
and select "Datalogic Scanner." If you receive an error message, it may
be necessary to disable security on the device.
terminal program to see incoming data on the port designated by the
computer's Bluetooth manager.
it is powered on.
setup menu.

adapter.
The Bluetooth address can be found under "Properties" within in the
Bluetooth setup menu.
NOTE
The link label is a Code 128 function 3 label with the following format:
<FN3 char>LnkB<12 character Bluetooth address>
Link to a PC in Server Mode
Gryphon™ I GD44XX/GBT4400/GM440X