Industrial 2 Of 5 Set Length 2 - Datalogic Gryphon I GM440 Series Product Reference Manual

1D Code Selection

Industrial 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
Length
Mode, or the second fixed length if in
the bar code's check, data, and full-ASCII shift characters. The length does
not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 10
instructions on setting this feature.
Table 10. Industrial 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CU2L2
Select Industrial 2 of5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Control. Length 2 is the maximum label length if in
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Fixed Length
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
Industrial 2 of 5
Variable Length
Mode. Length includes
page 283 for detailed
50 Characters
'5' AND '0'
171