Beep Volume; Disconnect Beep - Datalogic Gryphon I GM440 Series Product Reference Manual

Enter/Exit Programming Mode

Beep Volume

Selects the beeper volume (loudness) of radio-specific beep indications.
There are three selectable volume levels.
$CBTBV00(CR)
Beep Volume = Low
$CBTBV02(CR)
Beep Volume = High

Disconnect Beep

Enables/disables the beep indication that a handheld has become connected
or disconnected from a Base Station.
$CBTDB01(CR)
Disconnect Beep = Enable
242
The defaults are different for the STAR and BT models.
$CBTBV01(CR)
Beep Volume = Medium
DEFAULT
$CBTDB00(CR)
Disconnect Beep = Disable
DEFAULT
Gryphon™ I GD44XX/GBT4400/GM440X