Qr Code Set Length 2 - Datalogic Gryphon I GM440 Series Product Reference Manual

Enter/Exit Programming Mode
QR Code
This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in Variable Length Mode, or the
second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeroes).
See
$CQRL2
Select QR Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
230
Set Length 2
page 283 for detailed instructions on setting this feature.
Length 2 is 7,089 Characters
DEFAULT
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
~
CANCEL
Gryphon™ I GD44XX/GBT4400/GM440X
QR Code
QR Code Length Con-
representing