Scan
For Macintosh users
Note: Make sure that the printer is added to the computer. For more information, see
computer.
1
Load an original document into the automatic document feeder or on the scanner glass.
2
From the computer, do either of the following:
Open Image Capture.
•
Open Printers & Scanners, and then select a printer. Click Scan > Open Scanner.
•
3
From the Scanner window, do one or more of the following:
•
Select where you want to save the scanned document.
Select the size of the original document.
•
To scan from the ADF, select Document Feeder from the Scan Menu or enable Use Document Feeder.
•
If necessary, configure the scan settings.
•
4
Click Scan.
Scanning to an FTP server using a shortcut
1
Create an FTP shortcut.
a. Open a web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address on the home screen. The IP address appears as four sets of numbers
•
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the web page correctly.
•
b. Click Shortcuts > Add Shortcut.
c. From the Shortcut Type menu, select FTP, and then configure the settings.
d. Apply the changes.
2
Load an original document into the ADF tray or on the scanner glass.
3
From the home screen, touch Shortcuts > FTP
4
Select the shortcut.
Adding printers to a
67