Scan
Scan
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF)
•
Use the ADF for multiple-page or two-sided documents.
•
Load an original document faceup. For multiple-page
documents, make sure to align the leading edge before
loading.
Make sure to adjust the ADF guides to match the width
•
of the paper that you are loading.
Scanning to a computer
Before you begin, make sure that:
The printer firmware is updated. For more information, see
•
The computer and the printer are connected to the same network.
•
For Windows users
Note: Make sure that the printer is added to the computer. For more information, see
computer.
1
Load an original document into the automatic document feeder or on the scanner glass.
2
From the computer, open Windows Fax and Scan.
3
From the Source menu, select a scanner source.
4
If necessary, change the scan settings.
5
Scan the document.
Scanner glass
Use the scanner glass for single-page documents,
•
book pages, small items (such as postcards or photos),
transparencies, photo paper, or thin media (such as
magazine clippings).
•
Place the document facedown in the corner with the
arrow.
Updating
firmware.
Adding printers to a
66