Ricoh M C240FW User Manual page 39

Set up, install, and configure
Setting
Device Password
Sohu Mail
Note: Make sure that the SMTP service is enabled on your account. To enable the service, from the Sohu Mail
home page, click Options > Settings > POP3/SMTP/IMAP, and then enable either IMAP/SMTP service or
POP3/SMTP service.
Setting
Primary SMTP Gateway
Primary SMTP Gateway Port
Use SSL/TLS
Require Trusted Certificate
Reply Address
SMTP Server Authentication
Device-Initiated E-mail
Device UserID
Device Password
Value
Authorization code
Note: To create an authorization code, from the e-mail home page, click
Settings > More settings > User-end POP/IMAP/SMTP, and then enable
Authorization code status.
Value
smtp.sohu.com
465
Required
Disabled
Your e-mail address
Login / Plain
Use Device SMTP Credentials
Your e-mail address
Independent password
Note: The independent password is provided when IMAP/SMTP service or
POP3/SMTP service is enabled.
39