Sony XKS-C9111 User Manual page 237

Multi format switcher system with integrated control panel
Hide thumbs Also See for XKS-C9111:
Table of Contents

Advertisement

4
In the <Flex Shadow Source> group, select the signal
to use for the flex shadow.
External: Generate using an input key signal.
Internal: Generate using a full-size key signal.
5
In the <Flex Shadow Fill> group, select the signal for
the flex shadow portion.
Flat Color: Single color
Mix Color: Mix color signal set in the DME >Edge
>Color Mix menu (4117) (see page 241)
Ext Video: External video signal input from Ext In
6
When [Flat Color] is selected in step 5, set the
following parameters.
No.
Parameter Adjustment
1
Luminance Luminance
2
Saturation
Saturation
3
Hue
Hue
Adjusting the size of the flex shadow
1
In the Flex Shadow menu (4115), press [Size].
2
Set the following parameters.
No.
Parameter Adjustment
1
Size H
Enlarge or shrink horizontally
2
Size V
Enlarge or shrink vertically
3
Size All
Enlarge or shrink horizontally and
vertically
a)
4
Soft
Softness of shadow
5
Density
Density of shadow
a) The Soft parameter is valid only when [Internal] is selected in the
<Flex Shadow Source> group.
Setting the center point of the flex shadow
1
In the Flex Shadow menu (4115), press [Axis Loc].
2
Set the following parameters.
No.
Parameter Adjustment
1
Axis Loc H
Move the shadow center axis
horizontally
2
Axis Loc V
Move the shadow center axis
vertically
When the default Axis Loc setting is used
Axis Loc H
Shadow skewed with
Axis Loc set at the lower
left corner of the picture
Shadow skewed with Axis
Loc set at the midpoint on
the left edge of the picture
The flex shadow center axis appears when [Flex Shadow
Axis] is enabled in the <Graphic Type> group of the DME
>Input/Output >Graphic menu (4164).
For details, see "Displaying graphics" (page 229).
Skewing the flex shadow
1
In the Flex Shadow menu (4115), press [Skew].
2
Set the following parameters.
No.
Parameter Adjustment
1
Skew H
2
Skew V
Adding perspective to the flex shadow
1
In the Flex Shadow menu (4115), press [Perspective].
2
Set the following parameters.
No.
Parameter Adjustment
1
Perspective
H
2
Perspective
V
237
Axis Loc V
Shadow size and
perspective adjusted with
default Axis Loc setting
Video
Flex shadow
Axis Loc position
Skew horizontally
Skew vertically
Add horizontal perspective
Add vertical perspective

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents