Sony XKS-C9111 User Manual page 559

Icon Message
Invalid Name
This name is already existing.
Please enter other name.
The name "XXX" cannot be used.
The directory exists already...
Load
The categories set on the "File Load
Lock (Menu 7317.2)" cannot be
loaded.
The categories set as "Lock" will not
be selected.
Please confirm the categories again
and load.
Macro
[Store]
cannot be executed.
Macro register is locked.
Menu Macro
[Store]
cannot be executed.
Menu macro register is locked.
Password
Password Incorrect.
SCS Communication Error
Menu was launched from the built-in
SSD because SCS was not found.
Shutdown and restart the system is
recommended to exit from emergency
mode.
Separate
Cannot separate while playing back or
locking is in progress.
Separating has been canceled.
Please change the last character to
another one.
Set Time/Date
Error: Wrong Format.
Description
2122: Frame Memory >File >Copy/Move/New Folder
A folder with the same name as the duplicate source folder was specified
when [Duplicate] was executed.
Specify a different name.
2123: Frame Memory >File >Delete/Rename/Store
A folder/file with the same name that already exists was specified when
[Rename] was executed.
Specify a different folder/file name.
7171: File >Configure >Directory
A name that cannot be used as a directory name was entered ("XXX"
indicates the entered name).
7171: File >Configure >Directory
A directory with the same name that already exists on the device was
entered.
7161: File >All, External File >All
An attempt was made to load a file for a locked category.
7142.3: File >Shotbox, Macro >Macro >File Edit >Off Line Edit
When [Store] was pressed, the target register was locked.
Unlock the register before executing [Store].
7144.2: File >Shotbox, Macro >Menu Macro >File Edit >Menu Macro Edit
When [Store] was pressed, the target register was locked.
Unlock the register before executing [Store].
7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock
7317.2: Engineering Setup >System >Maintenance >File Load Lock
The wrong password was entered.
Enter the correct password.
Communication with the switcher control station could not be established at
startup.
2124: Frame Memory >File >Pair Recombination
Pair file cannot be separated because the target file is being played back or
is locked (see page 181).
2124: Frame Memory >File >Pair Recombination
Pair file cannot be separated because the name of the target file is 32
characters and the last character is a tilde (~).
Change the file name.
7317: Engineering Setup >System >Maintenance
A correct date and time was not specified.
Specify the correct date and time.
559