Chapter 15 Macros; Macros; Overview - Sony XKS-C9111 User Manual

Macros

Macros

Overview

A macro is a function that is used to store a sequence of
control panel operations (events) as data in memory
(macro register), which you can recall to reproduce the
same sequence of operations as required.
To record menu operations in memory, see "Menu
Macros" (page 368).
Macro registers
The area of memory that holds a macro is termed a "macro
register." For each control panel, there are 250 macro
registers, numbered 1 to 250.
Events
The individual control panel operations constituting a
macro are termed "events." One macro can contain a
maximum of 99 events.
The following table shows the operations for each control
block of the control panel that can be saved as events in a
macro.
Control block Event
Cross-point control • Cross-point selection
block
• Recalling a function assigned to
a cross-point button
• AUX mix transition enable/
disable
• Page recall on cross-point pad
• Delegation selection in cross-
point button rows (free assign
mode only)
• Cross-point assign table
selection in cross-point button
rows
AUX bus control block • Cross-point selection
(AUX bus operation
• AUX mix transition enable/
mode)
disable
• Page recall on cross-point pad
Chapter
Control block
AUX bus control block
(router operation
mode)
Transition control block • Auto transition and cut in the
Transition control block
(simple type)
Independent key
transition control block
Flexi Pad control block • Selection of transition type of
Key fader control block • Auto transition and key on/off in
Numeric keypad
control block
346
15
Event
• Cross-point selection
• Page recall on cross-point pad
transition execution section
• Auto transition and key on/off in
the independent key transition
a)
execution section
• Next transition selection
• Transition type selection
• Pattern limit enable/disable
• VTR/disk recorder/frame
memory clip playback, stop,
b)
cue-up
• Auto transition
b)
• Cut
• Transition type selection
• Pattern limit enable/disable
• VTR/disk recorder/frame
memory clip playback, stop,
b)
cue-up
Auto transition and key on/off
independent key transition
• Recalling the following data
- Key snapshots
- Snapshots
- Wipe snapshots
- DME wipe snapshots
- Shotboxes
- Master timelines
• Executing effects, rewind
the independent key transition
a)
execution section
• Transition type selection
• Recalling key snapshots
Recalling the following data
- Effects
- Snapshots
- Shotboxes
- Master snapshots
- Master timelines
b)
a)