Mask Settings - Sony XKS-C9111 User Manual

2
Press [Glow], turning it on.
Note
The key border function and glow function cannot be
enabled at the same time. The most recently set
function is enabled.
3
Set the following parameters.
No. Parameter Adjustment
1 Clip Reference level for highlight
detection
2 Gain Gain level for highlights
3 Soft Softness
4
Press [Matte] and set the glow color.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
To invert the highlight areas
Press [Glow Invert], turning it on.
The highlight and non-highlight areas are inverted.
To mask the Glow effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 247).
Note
When the signal format is 1080P, masking will cause the
edges to become blurred.

Mask Settings

Applying the Mask effect
1
Open the DME >Video Modify >Mask menu (4127).
2
In the <Mask> group, select the effect group you want
to apply the mask.
Effect Gp1: Posterization, Solarization, Nega, Sepia,
Mono, Contrast, Mosaic, Sketch, Metal
Effect Gp2: Defocus, Blur, Glow
3
Press [Position/Size].
4
Set the following parameters.
No. Parameter Adjustment
1 H
2 V
3 Size
4 Soft
5 Pattern
a) Pattern numbers 21, 24, and 304
5
To invert the mask source, press [Invert], turning it on.
6
Set the modifiers for the mask pattern as required.
When selecting [Aspect] and adjusting the pattern
aspect ratio
No. Parameter Adjustment
1 Aspect
a) When a minus value is specified, the picture is extended in the
vertical direction. When a plus value is specified, the picture is
extended in the horizontal direction.
When selecting [Angle] in the <Rotation> group
and slanting the pattern
No. Parameter Adjustment
1 Angle
a) –1.00 is one rotation in the counterclockwise direction. +1.00 is one
rotation in the clockwise direction. 0.00 is no rotation.
When selecting [Speed] in the <Rotation> group
and rotating the pattern at a constant speed
No. Parameter Adjustment
1 Speed
a) –100.00 is four rotations per second in counterclockwise direction.
+100.00 is four rotations per second in clockwise direction. 0.00 is in
stationary state.
Notes on applying a mask effect with a DME
If [Effect Gp1] and [Effect Gp2] are simultaneously
enabled in the <Mask> group of the DME >Video Modify
>Mask menu (4127), then the border or beveled edge is
also masked.
The following describes masking using a round pattern as
an example.
247
Horizontal position
Vertical position
Size of mask
Softness of mask
a)
Pattern number
a)
Aspect ratio
a)
Rotation angle of pattern
a)
Rotation speed of pattern