Sony XKS-C9111 User Manual page 134

Setting the border (menu)
1
In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2
In the <Resizer Effect/Rotation> group, press [Border/
Crop].
The Border/Crop menu (1115.1) appears.
3
Press [Border], turning it on.
4
Set the following parameters.
No. Parameter Adjustment
1 H Simultaneously adjust border width
of left and right edges
2 V Simultaneously adjust border width
of top and bottom edges
3 All Simultaneously adjust border width
on all edges
4 Density Border density
To apply color to a border
1
In the <Border Mode> group, press [Flat Color].
2
Set the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
To soften the inner edge of a border
1
Press [Border Soft].
2
Set the following parameter.
No. Parameter Adjustment
1 Inner Soft Softness of inner edge of border
To add a beveled light edge
1
In the <Border Mode> group, press [Beveled Light
Edge].
2
Set the following parameters.
No. Parameter Adjustment
1 Top Position of top side
2 Left Position of left side
3 Right Position of right side
No. Parameter Adjustment
4 Bottom
5 All
3
If setting the softness of the border, press [Border
Soft], turning it on.
4
Set the following parameters.
No. Parameter Adjustment
1 Inner Soft
2 Bound Soft Softness of border boundary
To add a beveled color edge
1
In the <Border Mode> group, press [Beveled Color
Edge].
2
In the <Color Adjust> group, select the edges for
adjustment.
Select [Top], [Left], [Right], or [Bottom]. To adjust all
four edges simultaneously, press [All].
3
Set the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
4
If setting the softness of the border, press [Border
Soft], turning it on.
5
Set the following parameters.
No. Parameter Adjustment
1 Inner Soft
2 Bound Soft Softness of border boundary
Setting the border (device control block)
You can adjust the border width of the top/bottom/left/
right edges in the device control block (trackball).
Note
The [BDR/CROP] button must be assigned to the
operation buttons beforehand in the Setup menu (see
page 412).
1
Enable the resizer as described in steps 1 to 3 in
"Reducing, enlarging, rotating, and moving keys
(device control block)" (page 131).
134
Position of bottom side
Position of all four sides
Softness of inner edge of border
Saturation
Hue
Softness of inner edge of border