Applying Dme Effects To Keys; Inserting Downstream Keys (With A Cut) - Sony DFS-900M Operating Instructions Manual

2
Press each of the next transition selection buttons
KEY1 to KEY4, beginning with the key that you want
to have the highest priority.
The key priority matrix changes to reflect the order in
which you pressed the buttons.
Example: The indicators in the key priority matrix light as
shown above when you press the next transition selection
buttons in the order KEY 3> KEY 1 > KEY 4 > KEY 2.
If you do not press all four buttons, the priority setting
operation is cancelled the next time that you press the
PRIORITY button.
3
Move the fader lever all the way to the top or bottom.
The new key priority settings are saved.

Applying DME Effects to Keys

128
Using Keys to Compose Video
BKDF-901
BKDF-902
1
In the KEY DELEGATION block (when using the
BKDF-901) or in the key/AUX bus control block
(when using the BKDF-902), select the target key of
the operation.
2
Press the DME ENABLE button in the KEYER block,
lighting it.
For more information about the function of this button,
see page 13.
3
When using the BKDF-901: Press the SHIFT button
in the DME/SETUP block, lighting it.
When using the BKDF-902: Skip to step 4.
4
Press a DME setting button such as BASIC or
BORDER.
5
Rotate the F1 to F4 knobs to adjust the parameters.
For details, see "Customizing DME Effects" (page
133).
Inserting Downstream Keys (with a
Cut)
BKDF-901
BKDF-902