Table of Contents
Advertisement
Functional characteristics
TIG welding
Function
Welding current On / Off
Secondary current (in latched operation)
Secondary current
Increase program number
Decrease program number
Switching between program and JOB
Increase JOB number
Decrease JOB number
Gas test
Welding current On / Off
Secondary current (in latched operation)
Secondary current
Infinitely variable increase of welding current (up/down speed)
Infinitely variable decrease of welding current (up/down speed)
Switching between up/down speed and JOB number
Increase JOB number
Decrease JOB number
Gas test
5.1.11.2 Tapping function (tap torch trigger)
Tapping function: Swiftly tap the torch trigger to change the function. The set torch mode determines the
operating mode.
The tapping function can be selected separately for each torch mode for the start of welding with parame-
ter
and for the end of welding with parameter
tap the secondary current.
Selection
System settings
Welding torch
Tap start
Tap end
5.1.11.3 Up/down speed
The up/down speed parameter determines the speed with which a current change becomes effective.
Press and hold the up push-button:
Increase current up to the maximum value (main current) set in the power source.
Press and hold the down push-button:
Decrease current to the minimum value.
Selection
System settings
Welding torch
Up/down speed
56
Only active in torch mode 1, 3 and 6.
Operation
BRT 1
BRT 2
UP
DOWN
BRT 2
UP
DOWN
BRT 2
BRT 1
BRT 2
UP
DOWN
BRT 2
UP
DOWN
BRT 2
. If parameter
is activated, there is no need to
Mode
5
3 s
6
3 s
099-00L200-EW501
13.05.2022
Advertisement
Table of Contents
Need help?
Do you have a question about the L2.00 DC Expert 3.0 TIG and is the answer not in the manual?
Questions and answers