Dynamic Power Adjustment - EWM L2.00 DC Expert 3.0 TIG Operating Instructions Manual

5.9

Dynamic power adjustment

This requires use of the appropriate mains fuse.
Observe mains fuse specification!
This function enables aligning the machine to the mains connection fusing. This may counteract frequent
tripping of the mains fuse. The maximum input power of the machine is limited with an exemplary value
for the existing mains fuse (infinitely variable). The function automatically adjusts the welding power to an
uncritical level for the corresponding mains fuse.
You can predefine this value in the System menu using parameter
When using a 25-A mains fuse, a suitable mains plug has to be installed by a qualified electri-
cian.
Selection
Service
Advanced settings

 Dynamic power adjustment
099-00L200-EW501
13.05.2022
Functional characteristics
Dynamic power adjustment
.
67