Table of Contents
Advertisement
3
Intended use
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and stand-
ards applicable for use in industry and trade. It may only be used for the welding proce-
dures indicated at the rating plate. Hazards may arise for persons, animals and material
objects if the equipment is not used correctly. No liability is accepted for any damages
arising from improper usage!
•
The equipment must only be used in line with its designated purpose and by trained or ex-
pert personnel!
•
Do not improperly modify or convert the equipment!
3.1
Software version
The machine control software version is shown on the screen during the start pro-
cess > see 4.3.1 chapter.
3.2
Use and operation solely with the following machines
•
Tetrix XQ 230 puls DC Expert 3.0
Description content for AC welding (AC) applies solely to the AC/DC machine variant.
•
Tetrix XQ 230 puls AC/DC Expert 3.0
099-00L200-EW501
13.05.2022
WARNING
Intended use
Software version
13
Advertisement
Table of Contents
Need help?
Do you have a question about the L2.00 DC Expert 3.0 TIG and is the answer not in the manual?
Questions and answers