Wireless General Settings - Cerio OW-215N2-X User Manual

DNS:

Check either "No Default DNS Server" or "Specify DNS Server IP" button as desired to set
up the system DNS.
Primary : The IP address of the primary DNS server.

Secondary : The IP address of the secondary DNS server.

802.1d Spanning Tree

The spanning tree network protocol provides a loop free topology for a bridged LAN between
LAN interface and 8 WDS interfaces from wds0 to wds7. The Spanning Tree Protocol, which
is also referred to as STP, is defined in the IEEE Standard 802.1d.
Click Save button to save your changes. Then click Reboot button to activate your changes.
3.4

Wireless General Settings

The administrator can change the data transmission, channel and output power settings for the
system. Please click on Wireless -> General Setup and follow the below setting.
CERIO software core : cen_v3.0