Configure System Time - Cerio OW-215N2-X User Manual

6.2 Configure System Time

System time can be configured via this page, and manual setting or via a NTP server is supported.
Please click on System -> Time Server and follow the below setting.
Local Time : Display the current system time.

Setup Time Use NTP : To synchronize the system time with NTP server.

Default NTP Server / NTP Server : Select the NTP Server from the drop-down list.

Time Zone : Select a desired time zone from the drop-down list.

Daylight saving time : Enable or disable Daylight saving.

If the system time from NTP server seems incorrect, please verify your network settings,
like default Gateway and DNS settings
User Setup : The management can set time by system time

Date: Setting the date for system.

Time : Setting the time for system.

Click Save button to save your changes. Click Reboot button to activate your changes
CERIO software core : cen_v3.0