Configure Advance Setup; Dmz By Cpe Mode - Cerio OW-215N2-X User Manual

Community : Set a community string required by the remote host computer that will

receive trap messages or notices send by the system.
IP(1~4) : Enter the IP addresses of the remote hosts to receive trap messages.

Click Save button to save changes and click Reboot button to activate.

7. Configure Advance Setup

7.1 DMZ by CPE mode

DMZ is commonly work with the NAT functionality as an alternative of Virtual Server(Port
Forwarding) while wanting all ports of DMZ host visible to Internet users. Virtual Server rules have
precedence over the DMZ rule. In order to use a range of ports available to access to different
internal hosts Virtual Server rules are needed.
Please click on Advance -> DMZ and follow the below setting.
Service : The DMZ default by "Disable". Check Enable radial button to enable DMZ.

Automatic Assignment : Enter Internal IP address of DMZ host and only one DMZ host

is supported.
CERIO software core : cen_v3.0