Cerio OW-215N2-X User Manual page 43

Ethernet Connection Type:

Check either "Static IP" or "Dynamic IP" button as desired to set up the system IP of LAN
port.
Static IP: The administrator can manually setup the LAN IP address when static IP is

available/ preferred.
 IP Address : The IP address of the LAN port; default IP address is 192.168.2.254
 IP Netmask : The Subnet mask of the LAN port; default Netmask is 255.255.255.0
 IP Gateway : The default gateway of the LAN port
Dynamic IP: This configuration type is applicable when the OW-215N2-X is connected to a

network with the presence of a DHCP server; all related IP information will be provided by
the DHCP server automatically.
 Hostname : The Hostname of the LAN port.
CERIO software core : cen_v3.0